Not everyone has 8 or 10 acres of property and a Bobcat at their disposal so you just have to make due with what you've got. You can still create a functional dirt bike track as long as you stick to a few basic rules. So long as you have a bit of land and a tractor you'll be able to make a course that can give you years of fun riding your dirt bikes. Of course, you may perhaps find that constructing dirt bike tracks is more thrilling than actually riding.
Step 1 - Get the OK Before Bull Dozing the Land
Before you start revving up your Bobcat you initially want to get permission from a few sources. Obviously, asking your folks for permission is your first step, but there are more people that have to give their approval as well. You must be certain you get whatever permits are required that will permit you to lawfully make and use your course.
It's also important to speak with your neighbors regarding your plans. I realize it's hard to imagine, but some people don't like raucous dirt bikes drowning out the sound of their television or additional dirt settling on their outside furniture. Save yourself a lot of problems by making certain you get consent from your neighbors, or else there is the chance of constructing a dirt bike track that you can't ride on. Spending time and cash constructing a terrific course, only to have the local establishment shut it all down, will not improve relations with your friendly neighbors.
Step 2 - Pick the Top Location
If your course is too close to neighboring homes you may have a noise and dust problem. If they all possess dirt bike motorcycles you most likely won't have a problem, but the probabilities of that are very slim. If they appear a little worried about having a track near their home perhaps you can agree to use it on specified days of the week.
Let the topography work in your favor by designing your course utilizing existing mounds and elevations. As an example, if you are able to find a place where the natural terrain already has little hills you won't have to pay as a lot of time with the Bobcat building your own personal jumps from scratch.
If you have the option of choosing a site with dry dirt or good clay soil, do not opt for a future dust bowl. In addition to loud engines, dirt will be a huge problem for the neighbors. If at all doable, strive to settle on a place where an undue quantity of dirt and dust is not going to end up in your neighbor's yard.
Also, be aware that low lying sections of the course will turn into little lakes during wet weather, so it's a must to plan your layout properly. It can also help if you make the paths at an angle, allowing water to run off rather than puddle. With correct designing you'll eliminate a lot of future track repair.
Step 3 - Before Climbing into the Tractor You Should do Some Planning
Ride your bike through the property before deciding on the route that your course will take. This can give you a fine idea on the natural flow of the land and enable you to style a suitable course layout. Dirt bike tracks need to be made to take advantage of the distinctive terrain that is already present. The course ought to also be determined by your talent level. As an example, if you are a newbie it probably is not sensible to build jumps that you cannot deal with safely.
Above all else, dirt bike tracks should be created to be as safe as possible. Don't make jumps where large rocks and trees can make riding hazardous. If you cannot get away from the rocks and trees position some padded protection like hay bales or old mattresses in front of possibly injurious objects. If you are going to have an accident you would like to be pick yourself up and get back to riding. Hospital trips are not as much fun as they are cracked up to be.
Step 4 - Rev up that Tractor and Begin Moving that Dirt
If you don't have a suitable tractor in your garage a Bobcat will be your next option. It is possible to rent one, with or without a driver, at very reasonable prices. You may be shocked at how quickly your course can take form as soon as you start moving that dirt around.
A couple of fine approaches are to place berms at the base of already-existing hills and use natural hills as jumps. It is a sensible idea to form as many corners as possible so that you won't be able to develop too much speed going into the jumps.
If you would like to build a dirt bike track that can give you years of satisfaction with very little track repair, you need to stick to these four basic steps. Be smart and spend as much time as you can coming up with the design of the course. A well-designed plan can be safer, more fun, and require less work and track repair.
Building dirt bike tracks is without question very gratifying as well as being lots of fun. Dirt bike motorcycles are exciting wherever you race, but racing, jumping, and cornering on your own personal dirt bike track is the greatest fun possible.
Read More From Joshua Harding
|
